Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to get a ground to ungrounded outlets
[ 4 Answers ]
I bought an older house and some of the wiring does not have the ground wire. Since the white wire goes to the ground in the breaker box,can I just use it to carry the ground also? Will this be safe? I have done some of the plug-ins with a jumper wire to the ground and white wire,have I gotten...
How do I wire a 30 amp receptacle with three prongs from a sub panel
[ 2 Answers ]
Hey Everybody! I am in the process of wiring a 30 amp receptacle that has only three prongs (Like an old dryer plug) for my new Miller 211 that I should be getting tomorrow. In the past I have always hooked up one black (110) to one of the lower prongs, one red 110 to the other lower prong and...
Older home with original wiring has three prong ungrounded outlets
[ 11 Answers ]
My client is in contract to buy an Older home (1962) AS IS. The home has some lovely updates however the wiring is original. The seller replaeced all the plugs with three prong outlets that are ungrounded. Are these plugs safe? How difficult is it to ground the plugs? What type of cost is...
Hot plug prongs / 3 way wiring reuse
[ 8 Answers ]
I have two hopefully simple questions. First, my wife's hair dryer plug's prongs get very hot. In fact if she is not careful when she pulls the plug out, the prongs could (almost) burn the skin. Lowering the dryer's heat setting significantly reduces how hot the prongs get... other items that... View more questions Search
|