Ask Experts Questions for FREE Help !
Ask
    frenchgd's Avatar
    frenchgd Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2012, 04:22 AM
    Trouble shooting a tempstar furnace model ntc6075fba1?
    I have a tempstar furnace model ntc6075fba1 in a house I just bought and the blower motor is not coming on. The pilot light ignites, the combustion blower comes on but the blower does not. Any suggestions of what it might be?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jan 28, 2012, 05:59 PM
    It sounds like the fan relay, but to know for sure you need to use a meter to find out what is wrong. You cannot troubleshoot a furnace or any other electrical appliance without using a meter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman model no.dgaa070bdta free trouble shooting? [ 2 Answers ]

My coleman lp furnace soots up bad I have cleaned it several times and it will run for a while , and it soots up again , it worked great last year and I also smell gas when it does kick in , the grean light keeps flashing.

Trouble shooting a clare furnace [ 1 Answers ]

My clare furnace will not come on. When I turn the furnace on noting happens. But if I turn the main fan switch on it comes on. But when I turn the thermostat up the small fan doesn't come on which in turn will not let the furnace work

Hunter fan model # 23282 trouble shooting/ electrical? [ 1 Answers ]

We have a hunter fan model #23282 fan in the family room. The last couple of days, turning on the light By the remote, the 3 light bulbs dim after a couple of minutes. Today, when turning on the light, the 3 bulbs blink on and off ever second and at a very dim wattage. Could this be a short or a...

Trouble shooting furnace [ 3 Answers ]

Hello I have a Altra 90 SX Armstrong furnace that has a cycle problem. The model # is a GUK75D103A with a Heatcraft control board 404030001 Cat. # 70K98 The problem that I'm actually having is that it is going through its cycles OK, except the induced fan keeps running and won't shut off. ...

Furnace Trouble shooting [ 1 Answers ]

I have an Coleman Evcon Furnace. Model #15020A the problem is I replaced the Inducer motor, and The furnace starts like normal but then the flames goes out after about a minute or two. The LED light says the Pressure switch is stuck open but it seems fine. I tried to replace the PC board but can't...

View more questions Search