Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Convert 208v to 480v
[ 2 Answers ]
We bought a 20kW UPS that is designed for 480V 3 phase. We are moving to a building that is only wired for 208V. Is there any way to convert 208 3phase to 480 volt 3 phase or will we need to scrap the UPS?
Convert 480V/3Ph to 208V/1P
[ 1 Answers ]
I need 80 dedicated 208V/15 amp circuits. How many amps of 480V/3Ph service are required? Thanks for the help.
Convert Table Saw from 110V to 220V
[ 3 Answers ]
I have a table saw (Sears Craftsman Professional, 1-3/4hp) that can be converted from 110v to 220v. Can I just use the 110v plug it came with and plug it into a normal 110v receptacle that is wired with two hot wires and a ground? (I've run 12/2 NM on a 20AMP CB). Aside from the obvious risk of...
Sizing Disconnects for 480v Temporary Service
[ 3 Answers ]
How do I pick the right disconnect for 480v temporary service at a construction jobsite?
480v Stepped Down To 120/208v
[ 10 Answers ]
If I have a 600A 480v service and I step in down to 120/208, will I have an increase of available amperes at the lower voltage? Or will the amperage remain the same no matter how I change the voltage? Thanks View more questions Search
|