Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #21

    Dec 21, 2008, 10:31 PM

    Check the warranty status of the unit before committing to replacement.
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman evcon furnace [ 4 Answers ]

Furnace will won't heat. Model #BGMO7516B Serial # 980905038. Red light blinks once. Will ignite but won't kick in to heat.

Coleman evcon furnace [ 5 Answers ]

My home has coleman evcon furnace 12 years old.I can set the thermostat at 74 degrees and the furnace will start with a 30second purge then the ignitor will warm up and glow red then the main burner lights.then the burner stays lit and the blower runs for a couple minutes. Then the thermostat calls...

Coleman evcon oil furnace [ 8 Answers ]

I have an older coleman evcon oil furnace that ran fine until today.It still runs but the smoke exiting the chimney is pure black and sooty. Would this be an indication it's not getting enough air or maybe getting too much oil? Don't have any experience with oil furnaces. Thanks, Ken

Coleman evcon furnace [ 1 Answers ]

I have a coleman evcon direct vent forced air furnace, the air is blowing cool air, everythinig else is working it's firing ,the fan is working

Centrifugal- Won't come on Coleman-Evcon Furnace- [ 2 Answers ]

Hi, Just found your site today-yipee! I have a problem with my Coleman-Evcon furnace (it has had A/C added)-just bought the house this year, but previous occupants said all was working before. When I turn on the heat on the thermostat, I get a code 3 readout, "Centrifugal Swithch Open"; I had...

View more questions Search