 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Faucet fixtures stem & seat
I'm fixing a bathroom faucet to fix a leak, it's got gerber fixtures, I took the stem out and noticed the seat needed to be changed also because it wasn't smooth. I went to take it out with a seat wrench and noticed it was very tight. Is there a way to get this seat out without stripping it?
|
||||
Check out some similar questions!
I bought a seat wrench from my local hardware store to remove a seat that is chipped in my shower. I used the wrench on the seat and it was so old (my guess is 15 years or so) that it just stripped out the metal and now I can not get the wrench to turn it at all. I have called a few plumbers and...
How do I replace a tub faucet seat in which the hex head is stripped out?
I have 3 sets of faucet valves & handles (Cadet Prestige chrome spread faucet - #2811.200) on sink and in bathtub. They were installed in 1989. All the faucets now drip, even when the faucet is tightly closed. I’ve taken them apart and noticed that the ‘permanent’ diaphragm has microcracks and...
I am trying to repair a leaky faucet in my bathroom sink. I have removed the cap on the handle, removed the screw and pulled off the handle. I am unable to remove the stem. Does anyone have any suggestions? This is a Sayco faucet and could be 20 years old. Thank you.
I have an American Standard 2 Handle Shower faucet. I am familiar with replacing the washer, stem and handles. It looks like there is a small break on the seat of this faucet. Question, is the seat replacable and how do you remove it? Model # I believe is 1800 or 1805. Thanks in advance for...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
