Ask Experts Questions for FREE Help !
Ask
    rkebmoss's Avatar
    rkebmoss Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 9, 2015, 02:29 PM
    Ignition output signal
    I have a code 15 error on 92 Honda Accord after replacing distributor. What's next? I'm still getting the code 15 error.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Sep 9, 2015, 02:59 PM
    Is the Ignition Control Module new?
    rkebmoss's Avatar
    rkebmoss Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 9, 2015, 07:55 PM
    Quote Originally Posted by TxGreaseMonkey View Post
    Is the Ignition Control Module new?
    Not sure. He put in a reconditioned/rebuilt distributor but every time it gets hot, the service light comes on, and I checked it using the paperclip in the connector method, and it blinks the 15 code. After submitting this question to the forum, I called the mechanic and he's going to give it another look since the dizzy is still under warranty. Not sure if the ICM is part of the distributor on this or separate? FYI... It stalls (at times) when it's hot and I accelerate. Not good when trying to get on the interstate.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #4

    Sep 10, 2015, 06:13 AM
    Sounds like a bad ICM. I would replace it, after coating the back of the new ICM with silicone heat transfer compound. I only recommend genuine Honda distributor housings--all others are suspect. My advice is to buy an OEM housing and install an aftermarket ICM, rotor, and cap, to keep the cost down. That should solve the problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why output is not 121212 in following java code but the output is |||? [ 1 Answers ]

please help in following java code, I have to write 121212 ten times in poll.txt file but when I open poll.txt file it shows me |||||||||| output import java.io.*; class Byte{ public static void main(String args) throws IOException { try{FileOutputStream f=new FileOutputStream("poll.txt");...

Harley softail turn signal lights not on when ignition on? [ 0 Answers ]

The turn signals work front and back turn signal switch selcted just the lights aren't on when inition is on. Same is trun for brake light. Headlight is on OK. Brake light comes on when braking. Could this be the TSM module?

To get higher wattage output in a lower output fixture. [ 1 Answers ]

We purchased a Harbor Breeze fan with light fixture, but did not see that the wattage output was only going to be 40 watts. We need more lighting in our room. We have tried bigger watt bulbs but the fixture starts to blink and then goes dim(back to the 40 watt output). How can we change that?

Analog signal to digital output [ 3 Answers ]

I have an analog t-stat which controls baseboard heating and an Aone HVAC unit on the roof. When in heating mode, it sends a signal to two modulating control valves in the hot water feed to the baseboards. These two valves are leaking by in the closed mode. They are jammed into a ceiling...

View more questions Search