Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Cars & Trucks (https://www.askmehelpdesk.com/forumdisplay.php?f=41)
-   -   Ignition output signal (https://www.askmehelpdesk.com/showthread.php?t=816029)

  • Sep 9, 2015, 02:29 PM
    rkebmoss
    Ignition output signal
    I have a code 15 error on 92 Honda Accord after replacing distributor. What's next? I'm still getting the code 15 error.
  • Sep 9, 2015, 02:59 PM
    TxGreaseMonkey
    Is the Ignition Control Module new?
  • Sep 9, 2015, 07:55 PM
    rkebmoss
    Quote:
    Originally Posted by TxGreaseMonkey View Post
    Is the Ignition Control Module new?
    Not sure. He put in a reconditioned/rebuilt distributor but every time it gets hot, the service light comes on, and I checked it using the paperclip in the connector method, and it blinks the 15 code. After submitting this question to the forum, I called the mechanic and he's going to give it another look since the dizzy is still under warranty. Not sure if the ICM is part of the distributor on this or separate? FYI... It stalls (at times) when it's hot and I accelerate. Not good when trying to get on the interstate.
  • Sep 10, 2015, 06:13 AM
    TxGreaseMonkey
    Sounds like a bad ICM. I would replace it, after coating the back of the new ICM with silicone heat transfer compound. I only recommend genuine Honda distributor housings--all others are suspect. My advice is to buy an OEM housing and install an aftermarket ICM, rotor, and cap, to keep the cost down. That should solve the problem.

    • All times are GMT -7. The time now is 09:13 AM.