Ask Experts Questions for FREE Help !
Ask
    aleugene's Avatar
    aleugene Posts: 2, Reputation: 1
    New Member
     
    #1

    Aug 8, 2007, 06:18 AM
    Craftsman Lawn Tractor Oil Filter
    Hello,
    I have just replaced the oil in my Kohler engine on a Craftsman gt5000. It was at that point I noticed some seepage from the oil filter can (52-050-02). I haven't changed the filter before and am wondering if it can be replaced while oil is in the engine or do I have to drain it again.:rolleyes:
    Please advise, thank you.

    Al
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Aug 8, 2007, 07:35 AM
    You can replace the filter with the engine off but you will lose about 1/2 quart of oil at the worst. When installing the new filter wipe the seat on the engine with a clean rag and also oil the filter gasket with a few drops of oil/ Do not use a filter removal tool to install, hand tighten only but firmly.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #3

    Aug 8, 2007, 04:48 PM
    Ballengerb1 Is Right On The Money. That Should Fix The Problem. And Might I Add, Change You Oil Filter Every time You Change Your Oil.
    aleugene's Avatar
    aleugene Posts: 2, Reputation: 1
    New Member
     
    #4

    Aug 9, 2007, 08:27 AM
    Thank you both for your response. While I should have considered this before, it will be better than having to drain the engine again.

    Al
    erndor2's Avatar
    erndor2 Posts: 1, Reputation: 1
    New Member
     
    #5

    Oct 16, 2013, 02:26 PM
    I have a craftsman rear engine riding mower, oil filter 951-12690 is there another replacement filter such as fram or any other brand I can purchase at my local parts store
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #6

    Oct 16, 2013, 03:27 PM
    Quote Originally Posted by erndor2 View Post
    I have a craftsman rear engine riding mower, oil filter 951-12690 is there another replacement filter such as fram or any other brand I can purchase at my local parts store
    If you go to them with the number they can cross reference-maybe

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman Lawn Tractor [ 3 Answers ]

How much trouble is it to change the drive belt on a 15.5hp Sears Lawn Tractor? Seems like the speed of this lawn tractor has slowed down. I am assuming that the drive belt could possibly be stretched. Any onther ideas?

Craftsman 20.0 HP lawn tractor won't move. [ 5 Answers ]

Hello, I have a 20.0 HP, 42'' mower; the engine starts and everything... it runs as long as the clutch/brake is being applied, but as you start removing the clutch/brake EVEN IN NEUTRAL the engine stops.. so the engine works but stops as you remove the clutch/Brake by the way it has a...

Craftsman 16.5 Lawn Tractor [ 1 Answers ]

I have recently replaced the mower clutch cable on my 16.5 HP Craftsman LT1000 lawn tractor with a 42" deck. After doing so, the transmission to the tractor will not engage. All the belts seem to be in place. I did not replace the clutch carriage bolt yet, as indicated by the instructions, after...

Sears Craftsman Lawn Tractor [ 4 Answers ]

I have a 10 HP Craftsman lawn tractor that will not move. The clutch works and it goes into gearbut the flat wheel spins and the gear wheel seems too have not enough pressure on it to move. Could this be just a loose drive belt? Thanks, Charlie


View more questions Search