Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Had no water banged on pressure switch started working so changed out switch worked
[ 7 Answers ]
Had no water Friday night. Banged on switch sat morning and it starting working for a few minutes. Changed out switch sat. afternoon work until Monday morning. Now now water and the breaker is tripped. When I wired it up I put the two wires coming from pump one red and the other black on the two...
Brake/clutch engine start interlock switch (limit switch per Murray)
[ 0 Answers ]
I have a 12 yr old,10hp, 30inch cut Murray riding mower which wouldn't start. After eliminating the battery, starter, solenoid and ignition switch as being the problem, I found that the plate that slides backwards to depress the button on the interlock switch is not coming back far enough to...
I replaced pull switch lights with recess but the wall switch won't turn off the light
[ 2 Answers ]
I added lights and outlets to my basement and all of the outlets work fine. Before I started the switch on the wall controlled one light and all of the others had pull strings. I've tried everything but the switch will not turn off the remaining three lights. What did I do wrong... how do I fix it?...
Separate Fan light switch, fan switch and switch for can lights to one location
[ 2 Answers ]
I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.
York residential furnace pressure switch problem code stuck switch
[ 1 Answers ]
I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals View more questions Search
|