[derek hall]

I'm looking for a picture of a three switched light switc I have 12 lights in room and want to control them 4 at a time ihave a three switched swich to put oni I have wired one set of four to the existing wires a red and black but how do I get power to the next 2 sets of four

[hkstroud]

Try editing your post and use a few periods and capital letters.
Are you looking of a 3-in-1 switch or are you looking for how to wire three switches for three banks of lights with four lights each?

[stanfortyman]

Try editing your post and use a few periods and capital letters.

+1!

I get the gist of what you are looking for, but I am not willing to put that much effort into deciphering exactly what you are asking.

And what kind of picture are you looking for?

[jl72]

Kind of hard to understand exactly what you are asking... if this is existing and you had all 12 lights running on 1 switch and now wanting to use 3 switches to run them, then you would have to run separate supply lines to each of the additional sets, basically you would have to separate the circuit between lights 4 and 5 and again between lights 8 and 9 and run a supply from there.