I'm looking for a picture of a three switched light switc I have 12 lights in room and want to control them 4 at a time ihave a three switched swich to put oni I have wired one set of four to the existing wires a red and black but how do I get power to the next 2 sets of four

Try editing your post and use a few periods and capital letters.
Are you looking of a 3-in-1 switch or are you looking for how to wire three switches for three banks of lights with four lights each?

Quote:

---

Originally Posted by hkstroud

Try editing your post and use a few periods and capital letters.

---

+1!

I get the gist of what you are looking for, but I am not willing to put that much effort into deciphering exactly what you are asking.

And what kind of picture are you looking for?

Kind of hard to understand exactly what you are asking... if this is existing and you had all 12 lights running on 1 switch and now wanting to use 3 switches to run them, then you would have to run separate supply lines to each of the additional sets, basically you would have to separate the circuit between lights 4 and 5 and again between lights 8 and 9 and run a supply from there.