 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore washer won't do anything
We bought a used Kenmore washer and dryer set and got them up and running and did a test wash without any clothes to make sure it went through the cycles properly and everything was fine. So we went to go start our first load, and the washer doesn't do anything when we pull the knob to start the load. No noise except the click of the knob. We checked our electrical and it seems to be fine. I have no idea what is wrong! The dryer works fine right next to it. Help!
|
||||
|
||||
|
The water level switch controls the starting of the machine. Is the water on? If it is you need to see if power is getting to the water valves with a meter. The water level switch has one common coming into the switch and wires out to the water solenoid valves. When the water level is at the set level the diaphragm switches power to the timer and starts the cycle. Make sure to check the water inlet first and make sure the screens are not stopped up. Stopped up screens will cause it to do nothing. Otherwise, you will have to trace the power with a meter.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My kenmore washer model 110.92283100 does not advance to next function, it still do the work if I use my hand to turn to the next function. So I thought that my washer timer part number 3356457 is at fault. I have no instruction to remove the timer from its control panel and I do not want to break...
The washer will fill and it will agitate for about 10 seconds, then it will stop.When it stops there is no motor sound.Then after about one minute it will start by itself and repeat the same thing over and over no matter what I set the knob to it does the same thing. Could it be the timer?
My son has a Kenmore stack washer/dryer that makes a noise that sounds something like a gear when washing only. Could this be a transmission problem? Jay
I have a 14 year old Kenmore stackable unit, spent several hundred dollars here and there every few years to have the dryer belt fixed, etc. Now the washing machine portion, it will start a wash cycle, then stop, leaving the water to sit in the barrell. A repair guy said its not worth replacing the...
Kenmore washer dryer combo 110-92966-102, The washer will fill and it will agitate for a little bit for about a minute, then it will stop before finishing.When it stops there is no motor sound.No matter what I set the knob to it will not start up again,but if I wait several minutes it will...
View more questions Search
|
