Ask Experts Questions for FREE Help !
Ask
    monkeybone41's Avatar
    monkeybone41 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Apr 23, 2012, 04:54 PM
    Murray Mower not enough voltage to coil
    I am not getting enough voltage to the coils to get a spark out of both. If I unplug one of the wires that goes to the bottom of the coil, I can get a weak spark out of the other coil but when both wires are attached I get no spark out of either. Would it be in the ignition switch? Everything else seems to be fine. Thanks
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Apr 23, 2012, 07:00 PM
    Hi,
    I hate to say it, but this too little info. If you have an opposed twin, then it has only one armature and it could be the problem. Please provide numbers, machine model, engine model number, etc. Here to help.
    Peace,
    Clarke
    monkeybone41's Avatar
    monkeybone41 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Apr 24, 2012, 06:07 PM
    Thanks, here's more info... Murray riding mower model# 46500x92 with a 22hp Briggs & Stratton OHV I/C V-Twin engine
    monkeybone41's Avatar
    monkeybone41 Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Apr 24, 2012, 06:16 PM
    Quote Originally Posted by crigby View Post
    Hi,
    I hate to say it, but this too little info. If you have an opposed twin, then it has only one armature and it could be the problem. Please provide numbers, machine model, engine model number, etc. Here to help.
    Peace,
    Clarke
    Thanks, here is more info... It's a Murray riding mower model 46500x92 with a
    22hp Briggs & Stratton OHV I/C V-Twin engine
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Contactor in outside unit has a short on the low voltage coil what does it look like? [ 1 Answers ]

I need to remove the contactor need to know is this procedure hard to do?

Test coil craftsman mower? [ 1 Answers ]

The mower will crank and fires up instantly for 1-2 seconds first thing in the morning. Then no Spark. Can I test coil by bypassing safety? Is there another relay that could be bad? Help

Murray part number for spindle assembly for a model#42515x92B Murray mower [ 0 Answers ]

I need a Murray part number for spindle assembly for a model#42515X92B Murray mower

Changes in Current/Voltage with changes in Coil/Magnet of a simple generator [ 0 Answers ]

What happens to Voltage/Current in a simple generator under following conditions: a) Increase the RPM of magnetic rotor. b) Using more stronger magnet. c) Increasing the number of turns of enameled copper wire. d) Using thicker copper wire.

Mower Replacement Belt, Old Murray Riding Mower [ 2 Answers ]

I have a model 38618X92E. I am looking for a manual or parts catalogue for this model so I can find the proper replacement belt. Thanks.

View more questions Search