 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Originally Posted by geno9146
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
First, thanks in advance for your time. I have two 3-way switches in my home at opposite ends of the house that control two different flood lights outside on the same circuit. I bought and hooked up a motion sensor to one of the floods thinking that when it is triggered it will turn both sets...
My HB flood lights stopped working recently, but if I turn the unit to "test", wave my hand in front of the sensor, the lights pop on. Turning it back to 1,5, or 10 minute timer delay does not work, even in the dark. Faulty opical sensor? Would that prevent the unit from operating in timer mode?
I have just got fitted a Halogen 500w Floodlight outside. It is connected to a ordinary 13amp plug. The problem is it keeps blowing the halogen bulbs. I keep replacing them and they last for about a week then I have to replace the blub again. Can you please help. I'm considering buying another...
Hello, I recently purchased a Lennox Elite Series Furnace/Heat Pump used and I need to wire the unit in. Does anyone out there have a wireing diagram for this unit?? Thanks, Larry Denney
View more questions Search
|
