Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Gas furnace (steam) not igniting, pilot is lit.
[ 0 Answers ]
I have replaced the switch on the side of the unit and tried to jump the thermostat and it didn't spark. Not sure what the problem is, the heat had come on automatically a week before. Any ideas on what happened and what the solution could be?
Pilot light stays lit, but the gas valve will not open
[ 1 Answers ]
I have an old Thatcher furnace model 53170. The pilot light stays lit, but the gas valve will not open to ignite the burners. I have a constant 24v across the transformer terminals. When I check the terminals at the gas valve I experience an intermitant 24v signal about every 5 minutes. I can't...
Gas furnace pilot won't stay lit
[ 1 Answers ]
About 1 month ago pilo light wouldn't stay lit so I replaced the thermocouple.. The unit worked fine for about 2 weeks. After that when relighting it would go out after 1 day or so. Bought a new thermocouple and this one would only keep the pilot lit for 1 to 2 hours. Reinstalled the thermocouple I...
Gas Furnace pilot light is lit but no heat, why?
[ 3 Answers ]
I can not figure out why my gas furnace pilot light is on but no heat is kicking on at all. I live in an old house but never had any real problems with it. Please help me figure this out my family and I are in the north and its 50 degrees in our house.
Gas furnace pilot refuses to STAY LIT!
[ 1 Answers ]
Hello, all, new here... OK, I have a Rheem gas furnace in the crawlspace which is original to the house (1984). This place was vacant almost two years before we moved in three years ago. Before the first winter I tried to fire up the heating system and could not light the pilot. A little... View more questions Search
|