 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas furnace (steam) not igniting, pilot is lit.
I have replaced the switch on the side of the unit and tried to jump the thermostat and it didn't spark. Not sure what the problem is, the heat had come on automatically a week before. Any ideas on what happened and what the solution could be?
|
||||
Check out some similar questions!
This morning, I found the boiler pilot light was out. I followed directions found on a DIY website. I lit the pilot, while pressing the red reset button for 30-60 seconds. As soon as I let go of the button, the pilot immediately goes out. The flame is blue. Is this the thermocouple? If so, what is...
About 1 month ago pilo light wouldn't stay lit so I replaced the thermocouple.. The unit worked fine for about 2 weeks. After that when relighting it would go out after 1 day or so. Bought a new thermocouple and this one would only keep the pilot lit for 1 to 2 hours. Reinstalled the thermocouple I...
I can not figure out why my gas furnace pilot light is on but no heat is kicking on at all. I live in an old house but never had any real problems with it. Please help me figure this out my family and I are in the north and its 50 degrees in our house.
Suddenly the furnace is not igniting, we can light it manually and the furnace kicks on, but once it reached the desired temp, it will not ignite itself when the temp goes back down. Where do we start troubleshooting?
Hello, all, new here... OK, I have a Rheem gas furnace in the crawlspace which is original to the house (1984). This place was vacant almost two years before we moved in three years ago. Before the first winter I tried to fire up the heating system and could not light the pilot. A little...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
