Ask Experts Questions for FREE Help !
Ask
    jettercool's Avatar
    jettercool Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 9, 2010, 03:53 PM
    How do you know when your ignition module is bad and where is located(Accord 1997)?
    When my engine reach normal temp the car stalls and when a make a full stop the engine dies and gets hard to start again until it cools down.Could that be the coil or the module or maybe the idle control valve??
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Aug 9, 2010, 04:06 PM

    Replace the Ignition Control Module (ICM) and coil:

    https://www.askmehelpdesk.com/cars-t...tml#post265896

    The coil is likely outside the distributor on your car.
    jettercool's Avatar
    jettercool Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Aug 10, 2010, 01:53 PM
    Quote Originally Posted by TxGreaseMonkey View Post
    Replace the Ignition Control Module (ICM) and coil:

    https://www.askmehelpdesk.com/cars-t...tml#post265896

    The coil is likely outside the distributor on your car.

    Thank you much! Ill do that and let you know later.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where Is Ignition Module 1992 Honda Accord Ex [ 12 Answers ]

My Car Won't Start And I'm Not Getting Any Spark From The Coil, So I Replaced The Coil To No Avail. I Guess The Next Thing Is The Ignition Module.. can Anyone Please Tell Me Where It Is Located... thanks

Replacing ignition control module 92 accord LX [ 4 Answers ]

Hi Everyone, I am trying to replace the ICM but I'm stuck. Cap's off, shield's off, rotor's off tried to remove screws holding plate which is blocking the screws holding the ICM. Is it better for me to just remove the whole distributor? Afraid of destroying the screw heads. Also there is also...

Ignition problems on 1997 accord [ 3 Answers ]

My car has had problems cranking it turns over but it does not fire up its getting fuel and the fuel pump and fuel pressure regulator is working and I just replaced my sparkplugs after it started to mess up what should I do to fix my problem?

92 Accord EX change ignition module [ 1 Answers ]

I located the ignition module on my 92 Accord EX but can't get to the screws. I don't want to just start disassembling distributor parts blindly. How do I get to the ignition module screws?

Bad Universal Ignition Module? [ 3 Answers ]

Hello, I had someone look at my handler and they said the circuit board went bad. He rigged one of the wires so that the fan would run and this would let the A/C come on. (I am in Florida) I called a company that worked on my friends unit and he instructed me to buy the WR 50A65-853 Model, but I...

View more questions Search