Ask Experts Questions for FREE Help !
Ask
    MAURICE123's Avatar
    MAURICE123 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jul 16, 2010, 06:49 AM
    Whirlpool awz3413 tumbledryer
    Turning the programme selector knob causes all the programme sequence lights to come on but the start button has no effect when pressed.

    Please help with suggestions

    Regards

    Maurice123
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 16, 2010, 06:53 AM

    Try unplugging and plugging back in. See if door switch clicks.
    MAURICE123's Avatar
    MAURICE123 Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Jul 16, 2010, 07:07 AM
    Quote Originally Posted by stratmando View Post
    try unplugging and plugging back in. See if door switch clicks.
    I have tried that a couple of times with no success, but thank you for the response.

    Regards.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    Jul 16, 2010, 07:35 AM

    Does door switch click? Did you try jumping the switch?
    MAURICE123's Avatar
    MAURICE123 Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Jul 16, 2010, 09:04 AM
    Quote Originally Posted by stratmando View Post
    does door switch click? Did you try jumping the switch?
    What is "jumping" ?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #6

    Jul 16, 2010, 09:13 AM

    Does Door switch click and did you try pushing in and trying.
    A temporary jump across door switch terminals will confirm the switch is the Problem.
    DOES the Door switch Click?
    MAURICE123's Avatar
    MAURICE123 Posts: 4, Reputation: 1
    New Member
    		  
    #7

    Jul 16, 2010, 11:27 AM
    Quote Originally Posted by stratmando View Post
    does door switch click and did you try pushing in and trying.
    A temporary jump across door switch terminals will confirm the switch is the problem.
    Does the door switch click?
    Hello again! Yes the micro switch is working perfectly a clean sounding click.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Washer [ 0 Answers ]

I have a Whirlpool washer model GHW9100LW1.even I don't use it , but the Water still full in the machine .It's only happen sometimes .can anyone please help me

Whirlpool wiring [ 2 Answers ]

I have a whirlpool dishwasher that mice chewed numerous wires.My son connected all the wires but two or three.I must have the wiring diagram to finish the wiring.It is not behind the kick panel.No one seems to have it.

Whirlpool washer [ 1 Answers ]

I have a whirlpool washer that will spin only when I turn the drum by hand,in the direction to the left. It's like it gets stuck. The model # islsq9110pwo. What could possiably be the problem? Any help would be greatly appericated.

View more questions Search