 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Where can I find a replacement drain for my 1980s jacuzzi whirlpool tub?
I am trying to replace the entire waste and overflow, including the bathtub drain flange, for a Jacuzzi whirlpool tub. The problem that I have run into is that the tub is an older model tub, and the drain hole in the tub is only 1 3/4 inches wide. The threaded part of the drain flange (that goes into the hole) is 1 5/8 inches wide. I can not find a replacement drain flange that will fit the tub. I have tried replacement kits, I have contacted Jacuzzi, and I have contacted all of my local plumbing supply stores. I am finding it hard to believe that there is not a replacement waste and overflow kit (with a correctly sized drain flange) that exists.
If anyone has any knowledge of where I might be able to find the correct parts for my tub or has any suggestions about how to handle this challenge, I would be very appreciative. |
||||
|
||||
|
|
||||
|
||||
 Originally Posted by Milo Dolezal
I have attached two pictures, one with a ruler next to the drain hole opening in the bottom of the tub. The overflow cap that you see is not the original. It is just holding some PVC piping in place until l get this figured out. The original part is a trip lever drain. When I talked to Jacuzzi, they told me that the standard drain opening is now about 2 1/4 inches wide which seems correct given the replacement parts I have come across so far. The basic problem, again, is that I can't find a drain flange small enough to fit the opening in my tub. Thanks for your help! |
||||
|
||||
|
Drain & Overflow assemblies are standard sizes as far as the hole goes however, the height of the tube from the drain to the overflow will require an extended one if it is a jetted tub. They are much deeper than the regular soaker tubs most homes have. Your best source for those are a local plumbing wholesale outlet. http://www.uspartscenter.com
|
||||
|
||||
|
The Drain & Overflow assemblies are standard sizes as far as the holes go however, the height of the tube from the drain to the overflow will require an extended one if it is a jetted tub. They are much deeper than the regular soaker tubs most homes have. You will likely not find anything for your tub to match your old system and would be best just looking for NEW drain & over flow in the color you want and change out the complete set.
Your best source for those are a local plumbing wholesale outlet. http://bathpartsplus.com |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Jacuzzi tub smell
Greetings, Glad to find this resource. :) I have three bathrooms that all have some form of leaking. :( Right now, two of them are my focus since I believe both were related to leaks from the bathtub drain. I had already read up on fixing this and got my plumbers putting, tub basket...
Please let me know if it is feasible to move the pump from the right hand side to the left hand side on a Jacuzzi 2 persons corner tub. The store, Low's, that sells this unit have only rh installed pumps, if they ordered a lh pump on the same unit, the price increases about $600.
I have a 4 yr old jacuzzi tub. It appears to be leaking around the rim where the pvc pipe connects to the drain on the tub. It is leaking into my furnace room, and I can see and kind of get to the drain. I was going to caulk around the rim where the pipe connects to the tub. I was wondering of...
I have a drain leak on my fiberglass jacuzzi tub. I have removed the metal drain from the tub and cleaned it, cleaned the rubber washer on top of the PVC drain pipe, and applied a new coat of plumbers putty to the metal drain before reinstalling it. I still have a small leak coming from where the...
View more questions Search
|
