Ask Experts Questions for FREE Help !
Ask
    grasschopper34's Avatar
    grasschopper34 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 24, 2010, 10:53 AM
    I changed the spark plug,oil,filter is clean and it had gas in it.it won't start
    It's a briggs stratton small lawn mower. It was given to me and I put a new spark plug in it and cleaned the filter and it cranked right up. I used it 3 times and it died again so I got a nother spark plug because old one was rusted and changed oil and filter is clean and has gas in it... it starts for a second and dies. Why won't it start?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    May 24, 2010, 11:00 AM

    Sounds like it needs the carb cleaned.
    pattyg2's Avatar
    pattyg2 Posts: 480, Reputation: 27
    Full Member
     
    #3

    May 25, 2010, 09:38 AM

    It could need a new diaphraphm for the carb.
    YouTube - How To Replace The Diaphragm On Briggs And Stratton Primer Plastic Carburators On Metal Gas Tanks
    richard shewmak's Avatar
    richard shewmak Posts: 3, Reputation: 1
    New Member
     
    #4

    May 26, 2010, 11:53 AM

    Thanks for that, pattyg. I have exactly that engine assembly, though it's a weedeater mower.. anyrate, I'm reconditioning it this weekend and though I have never worked on small engines before, I am mechanically inclined and that video opened my mind a bit, like a glimpse into what I should expect to find.

    Thanks again
    pattyg2's Avatar
    pattyg2 Posts: 480, Reputation: 27
    Full Member
     
    #5

    May 26, 2010, 12:38 PM
    Quote Originally Posted by richard shewmak View Post
    thanks for that, pattyg. i have exactly that engine assembly, though it's a weedeater mower.. anyrate, im reconditioning it this weekend and though i have never worked on small engines before, i am mechanically inclined and that video opened my mind a bit, like a glimpse into what i should expect to find.

    thanks again
    It doesn't matter what brand of mower as much as the engine. I fixed my murray with a briggs and stratton mower. It needed a new diaphrapm and intake tube. Take pictures before you tear it apart.
    derbyman2007's Avatar
    derbyman2007 Posts: 4, Reputation: 1
    New Member
     
    #6

    May 26, 2010, 04:44 PM

    Check the coil under the engine casing remove the 4 bolts 3/8 socket and use a 1/4 or a 5/16 socket for the coil remove it clean it with a sand paper and the fly wheel make sure that it is pretty clean and then reinstall it

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bmw 1996 z3 just changed fuel filter now won't start [ 1 Answers ]

1996 bmw z3, 44k miles, parked in garage last year, started up and drove went over speed bump then check engine light went on. So, changed fuel filter now won't turn over. It starts but cuts out. What to do?

Will a 95 honda civic lx not start due to fuel filter not being changed [ 1 Answers ]

Will a 95 honda civic lx not start due to the fuel filter not being changed in years?

Found the gas,when I pulled spark-plug [ 7 Answers ]

Hello, I got a good deal on a Bolens 38in rider. Was marked down to 500.$ Was only couple seasons old and had been returned 4 times no start. Anyway has done good till the kids left the fuel on. Tried to start a few times tought battery was low. Charged it up, looked further thougt maybe...

Oil around spark plug 1997 honda accord [ 1 Answers ]

I am seeing oil around my 3rd and 4th spark plugs, what is wrong and what can I do?

94 Honda Accord - oil in spark plug holes [ 2 Answers ]

I have 94 accord with 185K. I am changing the plugs and have oil in #2 and 3 spark plug holes. Should there have been orings or gaskets changed during a recent Timing belt change I had done at the dealer? Timing belt change was doen within the last 10000 miles


View more questions Search