Ask Experts Questions for FREE Help !
Ask
    axbory's Avatar
    axbory Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 27, 2010, 01:40 PM
    The blower motor does not start on ducane
    The blower does not run even in manual on a ducane furnace
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Mar 27, 2010, 02:44 PM

    Could be control board, capasitor, or motor itself. Does it even make a humming noise??
    axbory's Avatar
    axbory Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 27, 2010, 03:13 PM
    Quote Originally Posted by Joshdta View Post
    could be control board, capasitor, or motor itself. Does it even make a humming noise???
    I put another motor in an another capacitor. No hummering sound. I put thermostat on manual still no response.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #4

    Mar 27, 2010, 06:10 PM

    Sounds like you need a new control board. Check to see if it is putting 115 volts out to the motor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace blower motor start and keeps running won't stop [ 12 Answers ]

I have a Carrier central furnace (furnace model 58GP050-BA). Now with the thermostat off the fan set to auto and the Gas pilot is on. When turn on the power switch to the furnace, the blower motor start and keeps running and won't stop. I have to turn off the power switch to the furnace to turn the...

Blower motor of Trane XE80 furnace won't start [ 8 Answers ]

I have a Trane XE80 gas furnace. The purge motor and burner go on, but main motor won't run. LED flashing light flashes continuously when burner is on however, when the burner shuts off, the LED light flashes 4 times at an interval. I tried to look for a reset button on the main blower motor but...

Blower motor won't start [ 1 Answers ]

We have a RPJ heat exchanger Comfortmaster# GUG0948016N. I started the air, but the blower will not start. I swithed it to on-still nothing.How can I find out if it's the thermostat or if it's the motor itself.:

Set Blower motor start time? [ 1 Answers ]

Manufacturer = Inter City Furnace Manufacture Date = 1991 Type = Forced air - up draft (house is on a slab) Fuel = Nat Gas The furnace cycles on and off correctly BUT it seems that the blower motor takes a long time to turn on - the flame is burning for maybe a minute(?) before the blower...

View more questions Search