Ask Experts Questions for FREE Help !
Ask
    terence18's Avatar
    terence18 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 4, 2009, 05:14 AM
    Bristan 1901 shower
    Bristan 1901 shower not getting very hot
    terence18's Avatar
    terence18 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 4, 2009, 05:20 AM
    Bristan 1901 shower
    Bristan 1901 shower not getting very hot can I adjust it and how ?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Jan 4, 2009, 06:46 AM
    Quote Originally Posted by terence18 View Post
    Bristan 1901 shower not getting very hot can i adjust it and how ?
    I can't pull up a cutaway of your mixing valve but it has a Thermostatic cartridge that maintains a selected temperature to within +/- 1°C
    Which has been pre-set to maximum temperature for optimum safety.
    Since it's Guaranteed for 5 years if yours is younger you can get it replaced under warranty. Can you dig out the specs. That came with your valve and send it to me? Regards, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My 1901 3.3 dodge van [ 2 Answers ]

My 1991 3.3 dodge van have a low speed miss new plugs/wires,. runs good at high speed,what I need to do?

Correct pvc shower drain for sterling #62040100 60" seated shower receptor [ 6 Answers ]

Has anyone installed a sterling 60" seated shower receptor with wall surrounds on a concrete slab. The new unit did not come with a shower drain. there is a hole in the bottom That is 3-5/16" (8.4cm) and it calls for a drilled hole in slab oor foundation of 4-1/2" (11.4cm). the old drain line...

My shower drain is raised above the shower pan by 3/16" causing standing water [ 2 Answers ]

I have a fiberglass shower stall where the bottom has either slumped or the stall was installed wrong to begin with (it has no support beneath the surface that I stand on). The drain sticks above the level line so I have about 3/16" of standing water. I cannot easily access the bottom from the...

Pisa Bristan Shower - water is always colder than the tap [ 3 Answers ]

OK, I have a Pisa Bristan mixer shower. The shower, when turned to it's hottest setting, produces luke warm water, despite water from the tap being much hotter. I suspect that the mix of hot to cold water is not good even when I have turned the shower up to it's hottest. This is a permanent...

View more questions Search