 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
97 Ford Taurus AC pressures low side high high side low
I'm working on a 1997 taurus the compressor was replaced the system was evacuated,and started to recharge it.the first can went in very slowly. When I checked pressures the low side was 75-80 and the high side was 100 the compressor is running .
Where should I check for blockage? |
||||
Check out some similar questions!
I would like to find out the normal operating range of pressure (high and low side) on a fully charged R-22 (york) home air conditioning system; also, the unit is a 4 ton unit, what is the total freon capacity in the system. How much does it hold?
It's 94 integra gsr, driver's side low beam weak, has 11volts and high beams dead. Passenger's side bright on both low and high beams with a little over 12 volts. Is there a relay that controls the driver's side headlights?
My puppy who is 7 months old and she just got sick four days ago and we went to emergency Clinic for her and found out that she had a high white cells count so what it means? Now she don't eat at all or drink. She just sleep a lots and couldn't walk at all. Her legs is very weak so what is cause...
1992 Honda Accord EX. Where are the high and low side ports located for AC system. Going to retrofit the AC port valves. Can find what I think is the low side port but cannot see the high side port. Thanks very much moyohonda In response to answer by TXgreasemonkey, I cannot find R12...
I have some a/c exp, recent purchased older home that has 4 HP's. One OK, one has stuck compressor,5ton, but what's stuping me is the other 2Ton Carrier units? Both I vacumn to 25+ in", started charge, they go to over 200psi in suction side, rev valve OK, can someone explain? Problem, Thanks ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
