Ask Experts Questions for FREE Help !
Ask
    umponeme's Avatar
    umponeme Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 3, 2008, 10:02 PM
    94 integra gsr driver side low beam weak and high bean inop
    It's 94 integra gsr, driver's side low beam weak, has 11volts and high beams dead. Passenger's side bright on both low and high beams with a little over 12 volts. Is there a relay that controls the driver's side headlights?
    Mik____'s Avatar
    Mik____ Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Aug 3, 2009, 12:03 PM
    Are you using factory head light's / bulb's
    What do your grounds look like? Hondas are known for poor ground's on the head light circuit (worse if you tried to put larger bulb's in).
    Just because you have power doesn't mean you have groind and you need bolth for the circuit to work.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Older toilets -- weak swirl, weak flush [ 24 Answers ]

Hope someone can help. Our toilets are original to the house, 20-plus years old. When flushed, the swirl isn't strong enough to completely flush the bowl. The bowl does NOT overflow, but it has to be flushed multiple times. We have very hard water where we live, despite having a regularly...

Replace driver side mirror on chysler town/country [ 1 Answers ]

How do you replace driver side mirror on 2003 chysler town and country?

High Beam/Low Beam on 99 Durango [ 4 Answers ]

My headlights will only work on high beams. My sister owned the Durango before and said she had to mess with the switch from time to time to get low beams to work then finally stopped working. Anyone ran into this problem? I think its in the steering column. I've checked fuses and headlights. ...

High and low side ports AC system 1992 Honda [ 5 Answers ]

1992 Honda Accord EX. Where are the high and low side ports located for AC system. Going to retrofit the AC port valves. Can find what I think is the low side port but cannot see the high side port. Thanks very much moyohonda In response to answer by TXgreasemonkey, I cannot find R12...

Heat Pump High Pres on LP Side [ 2 Answers ]

I have some a/c exp, recent purchased older home that has 4 HP's. One OK, one has stuck compressor,5ton, but what's stuping me is the other 2Ton Carrier units? Both I vacumn to 25+ in", started charge, they go to over 200psi in suction side, rev valve OK, can someone explain? Problem, Thanks ...

View more questions Search