Ask Experts Questions for FREE Help !
Ask
    NicknMarita's Avatar
    NicknMarita Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Mar 23, 2008, 04:30 PM
    Harbor Breeze Ceiling fan
    Our light and fan work but the remote is not working to turn the fan on or the light on. We have changed the code nemerous times without any luck. Please let us know what we need to do.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Mar 23, 2008, 08:20 PM
    Does the LED come on on the remote? Does the fan have pullchains?

    See:

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
    NicknMarita's Avatar
    NicknMarita Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Mar 24, 2008, 07:59 AM
    No pull chain... Yes the LED is on.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    Mar 24, 2008, 08:30 AM
    You say you changed the Code, do you mean Codes. Both need to match(receiver and transmitter)
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #5

    Mar 24, 2008, 11:32 PM
    Led blinks or stays on?
    NicknMarita's Avatar
    NicknMarita Posts: 4, Reputation: 1
    New Member
    		  
    #6

    Mar 25, 2008, 07:31 AM
    YEs, I changed the code in the remote and in the remote box in the fan. We changed the code a few times. The LED stays on as well...
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #7

    Mar 25, 2008, 07:42 AM
    Ceilingfan guy will probably answer shortly, I would guess if it stays on, It is a Low Battery or button is stuck.
    NicknMarita's Avatar
    NicknMarita Posts: 4, Reputation: 1
    New Member
    		  
    #8

    Mar 25, 2008, 10:01 AM
    Just bought this fan and a new battery had installed professionally and no one knows what's wrong with it. Should I take it back and get a new one?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #9

    Mar 25, 2008, 11:30 AM
    If the LED stays on, a button on the remote is stuck. Try to unstick it or clean the keypad and see if that solves the problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor breeze ceiling fan [ 2 Answers ]

I am trying to put up a harbor breeze ceiling fan and also bought a remote for this and can't find a place to put the electrical part for the remote. Any suggestions

Harbor Breeze Ceiling Fan [ 1 Answers ]

I have the pewter Harbor Breeze ceiling fan that has the light kit on the ceiling, then the fan blades and then the four separate lights. I need to know how to change the lights on the top kit... it seems impossible. :mad:

Harbor Breeze ceiling fan. [ 1 Answers ]

My ceiling fan w/ remote had water spilled on it, the power light flashed for a day then stopped. Now when I use it, I have power to two lights, speed control, but no stop or reverse. Please advise.

Harbor Breeze Ceiling Fan [ 2 Answers ]

HELP PLEASE... there are 1,000 holes in the Cheshire Harbor Breeze motor fan where the flanges should go. I can get 4 blades on without it rubbing but it is a 42 inch 5 blade set up. Does anyone know where I can get a close up picture that will show this models motor so I can distinguish where...

Harbor Breeze ceiling fan [ 1 Answers ]

My Harbor Breeze ceiling fan is 2 years old. It suddenly stopped responding to the remote control. Battery in remote is new. Dip switches in original position on remote (all 4 up). Cannot see switches on motor housing without dismantling it. Anything to do to avoid calling service person to...

View more questions Search