Ask Experts Questions for FREE Help !
Ask
    Joey_allard's Avatar
    Joey_allard Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 21, 2008, 03:10 PM
    Noma 5 +2 programmable thermostat no blue connector
    Hi,

    I just bought a Noma thermostat to replace my older one (Robertshaw). When I disconnected the old one I had 5 wires an extra blue one? On the Noma I have no place for it? What do I do with it?

    Thanks for the help

    Joey
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Mar 21, 2008, 05:34 PM
    I have no idea with the information you have given.

    Model/number of old thermostat.
    Model/number of brand of new thermostat.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Noma Programmable thermostat [ 1 Answers ]

I moved into a house with a Noma programmable thermostat, there are no instructions on how to program it. I have been turning it on to heat, and up until now it has been operating fine. But tonight it won't heat above 15 degrees, it begins to cycle, then cuts out, I hit the over-ride button, but it...

Noma programmable thermostat [ 1 Answers ]

Need to relocate a Noma programmable thermostat, it has 2 parts, the thermostat & base, how do you separate the 2?

Noma programmable thermostat [ 1 Answers ]

Need to relocate a Noma programmable thermostat, it has 2 parts, the thermostat & base, how do you separate the 2?

Noma programmable thermostat [ 2 Answers ]

I have tried to replace a conventional lever action mercury thermostat with a new digital programmable Noma thermostat. The problem is when it turns on the heat and fan works fine but when it reaches heating it shuts of but the fan stays on and will not shut off:confused:

Programmable noma thermostat [ 1 Answers ]

I am changing a York thermostat to a Noma programmable. I have rewired transferring w to w, rc to rc, g to g, y to y . There is a wire jumper on the York that goes from rc to 4. There is no corresponding 4 on the Noma. Does anyone have a suggestion as to where the wire jumper should go if I...

View more questions Search