Ask Experts Questions for FREE Help !
Ask
    mtgilliland's Avatar
    mtgilliland Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 7, 2008, 10:41 AM
    Kenmore Wash 110.24832200 not agitating properly
    My Kenmore washer model # 110.2483220 is not agitating properly. It is still agitating but not like it should. When I press down on the agitator it works again, when I lift it, it skips. Can you tell what is wrong and how to fix it?

    Thanks
    Michelle
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Mar 7, 2008, 11:11 AM
    Replace the cams (dogs) Easy and cheap fix. Remove the fabric dispenser cap the bow ite cap. Under that you should find a 7/16' bolt to remove. Now remove the agitator and separate the the agitator and replace the cams. Less than $15.00 and about 30 min to replace
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washer not spinning or agitating [ 4 Answers ]

I have a Kenmore model# 110.28912790 that won't agitate or spin. It fills with water and stops filling at the appropriate amount. But, it won't begin to agitate. I just hear the motor spinning. It sort of sounds like a loose bearing. I have verified that the lid switch works. When I...

Kenmore Elite washer not spinning/agitating [ 11 Answers ]

I have the same washer as SerTam (dated 4/2/06). Model #110.20052 992 The washer filled and the light said it was washing but it was just making a horrible buzzing sound. It was not agitating. I was able to get it to drain though. It also would stop draining if I raised the lid so I don't think...

Kenmore Washer, Model No. 110.24832200, Stopped Spinning and won't drain [ 1 Answers ]

I have a Kenmore 80 Series, Model No. 110.24832200 washing machine. It goes through the cycles fine, but when it comes to spinning and drainig the water, it won't function properly.

Kenmore Elite washer not agitating and Draining [ 3 Answers ]

Hi, I have a Kenmore Elite Catalyst washing machine that starting making a wrong noise while mid cycle. It is full of water and I can't get it to drain or agitate. It's the push button type so you can't set it at mid cycle. I have bailed lots of water out and of course removed the clothes but...

Kenmore Heavy Duty Washer now agitating [ 3 Answers ]

Our Kenmore Washing doesn't seem to be agitating correctly. The base will turn but the agitator doesn't. I pulled it off and put it back on. Just to make sure it was seated correctly. Any thoughts. Thanks Chris

View more questions Search