Ask Experts Questions for FREE Help !
Ask
    kimcollins's Avatar
    kimcollins Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 2, 2008, 08:15 PM
    Installed digital therm. Won't cool
    I installed a digital thermostat and the heat works, but the cool doesn't! Is it wiring?:mad:
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Mar 2, 2008, 08:19 PM
    If it worke with old thermostat, it is thermostat connections, blue or yellow is sometimes cool(G).
    You could trace out or follow low voltage wire from compressor unit to thermostat via Air Handler.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Saturn won't start, power locks won't work, radio resets itself. [ 4 Answers ]

My 99 Saturn has had some starting problems in the past. It would sometimes not start but if you let it sit from anywhere from 45 minutes to 24 hours, it would eventually start. Or, after having Dad look at it, we could tap the starter and it would work. So we thought it was the starter. I...

Add on furnace blowers and therm. [ 1 Answers ]

I have a existing gas fired forced air furnace and am getting a add on wood furnace. I plan on leaving my gas furnace about 10 degrees lower than the wood thermatat. My wood furnace has its own blower but I think I would like to turn my gas blower on also when the plenum gets hot on the wood burner...

Dishwasher won't drain, just installed new g.disposal. [ 5 Answers ]

I recently installed a new sink and garbage disposal. The new sink has a new faucet too with a sprayer where there was an AIR GAP on the old sink. I just used the dishwasher for the first time since installing new things. I left the room and when returning when the dishwasher was done there was...

Kenmore he4 panel won't work and dryer won't start [ 1 Answers ]

I have had the circuit board/panel replaced once on my he4. I had only 2 weeks left on the warranty and figured it should be OK once it was fixed. They wanted another $200 to renew the warranty! Didn't have the $$ at the time. Anyway, the same darn thing is happening... you have to push the buttons...

No power in therm unit [ 8 Answers ]

Hi, I need help fixing ac unit. I called the help desk for my Hunter thermostat and they had me try and start the fan using a metal paper clip. The problem before I did that was that it wasn't starting. There was power but it wasn't regulating the temp. Well in the process I cause a shortage...

View more questions Search