Ask Experts Questions for FREE Help !
Ask
    1stAnita's Avatar
    1stAnita Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 26, 2008, 11:40 AM
    Furnace will not fire.
    I have a Amana Air Command 80 Model GHI. I heard the vent blower motor start up but no follow-up ignitor action. The ignitor was found to have a crack in it. The furnace never did shut itself off. Suggestions would be appreciated.
    jack dandy's Avatar
    jack dandy Posts: 226, Reputation: 9
    Full Member
    		  
    #2

    Jan 26, 2008, 12:00 PM
    You need to put a new igniter in to make your furnace work properly. It will not work properly if cracked (the igniter).
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace will not fire [ 15 Answers ]

I took the cover off and noticed the red light was blinking 2 times is there any way I can fix this myself or do I need to call someone

Self ignitor furnace won't fire [ 1 Answers ]

Our Coleman Evcon furnace is reluctant to fire the first time in fall. The ignitor glows but then the gas will not fire. Is something dirty, is this something I can service myself? Appreciate any help, thanks.

Furnace catching fire [ 1 Answers ]

Our heating furnace is powered by propane gas. There is a weird smell coming from it and when I relit the pilot light & turned the thermostat to "on" fire started blowing out of the furnace. Please help... could we have carbon monoxide in our home? There is also soot caked on the inside of...

Carrier furnace does not always fire [ 1 Answers ]

Have a carrier weathermaker 90% HIGH EFFICINCY FURNACE ,this a spuratic problem.Sometimes when the stat calls for heat I can here the vent van come on and sometimes will run for 15-20 minutes, then the furnace fires up.some times it won't fire at all, shuting off the power switch on the side of the...

Furnace will not fire [ 1 Answers ]

I have a comfortmaker GNJ075n12a1 80% furnace installed in 96 the igniter come on and the blower comes on and the system cycles a couple of times before the control locksout on during this time the gas valve is not energizing to fire the furnace if you shut the system down for a couple of...

View more questions Search