Ask Experts Questions for FREE Help !
Ask
    narrows61's Avatar
    narrows61 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 6, 2008, 10:49 AM
    Amana gas furnace
    Where can I find a natural to lp converter for amana furnace
    Frdbrkl's Avatar
    Frdbrkl Posts: 94, Reputation: 7
    Junior Member
    		  
    #2

    Jan 6, 2008, 11:00 AM
    Only from an Amana dealer-order it by model number. It should consist of a few tiny parts (spring, etc) that are installed into the gas valve of the unit. I believe Amana is now produced by Goodman (Janitrol).

    Asking this question, you would best be served by calling a licensed professional, as testing/adjusting gas pressures is mandatory when converting from natural to lp or vice versa, and a slight mistake in this area can be deadly.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Amana furnace [ 2 Answers ]

Hi Everyone, I am having so much trouble, trouble shooting my furnace, I have a Amana Furnace, I noticed that the Burner is not staying long enough for the heat to blow through the vent. This is my observation, once adjusted the temp desired in the thermostat, the burner on the furnace...

Amana furnace [ 2 Answers ]

I misplace the wiring diagram and installation manual for my Amana Furnace. Any chance someone, website may have a good source for that: Mod # GUCO70B40A, Serial # 9110104173, Mfg # P9114303F Suggestions for a fix would be appreciated also: Having problems starting. The igniter works fine...

I have an Amana 80+ furnace. [ 1 Answers ]

When the temperature reaches the desired setting, the gas burners turn off as they should, however the fan continues to run and blows cold air. The temperature dips well below the thermostat setting, but the burners do not turn back on and the fan continues to run. I also notice a flashing red...

Old Amana furnace needs new blower [ 7 Answers ]

Happy to be here. Two part question- I own an old Amana "Air Command" gas fired forced hot hir furnace. Model # GHE140DJ-4. It's circa 1979. Blower is 2-speed, capacity is listed @ 112000 BTU /hr. The fan would not come on during auto, but I managed to make it spin under "on" position by spinning...

View more questions Search