 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am about to have a nervous breakdown. I brought the original broken switch (that I have since discarded) into Home Depot with me, and I bought an identical switch with the same part# on it. The fan should have 3 settings plus "off." The fan will not, however, turn off. Both the repairman who...
Hello. I have read through the other questions hoping to find an answer; no luck. We have a harbor breeze fan and it is controlled by just a fan switch, not a remote fan switch (not the one it came with). We have had it for a little over a year and a few months ago the fan and light just stopped....
I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and...
The pull cord broke off inside the fan so I went out and bought a new switch and the problem is the old switch was set up like this' grey wire in 1 red wire in 2 yellow wire in 3 4 was empty and the black wire in c . The new switch has no c 'it has 1 2 3 and L So I put grey in 1 ...
The switch chain broke off and I replaced the brokenswitch with a different switch that I saved from an old fan that was thrown away. The broken (old) switch had four wires (L - black... 1 - orange... 2 - purple... 3 - yellow). The new/ replacement has only 3 wires. I foolishly failed to mark the...
View more questions Search
|
