 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ceiling fan switch
The pull cord broke off inside the fan so I went out and bought a new switch and the problem is the old switch was set up like this' grey wire in 1 red wire in 2 yellow wire in 3 4 was empty and the black wire in c . The new switch has no c 'it has 1 2 3 and L So I put grey in 1 red in 2 yellow in 3 and black in L and it does not work. Went to a few stores and can not find a switch like the old one. Not sure what to do ' any help would be appreciated thanks.
|
||||
|
||||
|
What make is your fan?
I presume c = L and the rest are the same. http://www.ceiling-fans-n-more.com/c...and-repair.php |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I originally had two 48" fluorescent lamps in the kitchen. The ballasts have gone and I've taken this opportunity to put up a ceiling fan. I have two switches. One at each entry to the kitchen. The question is... When the original lighting was removed there were two different sets of wires,...
We bought and had installed a Harbor Breeze ceiling fan item #134743 (from Lowe's.) Right now the fan spins so it's pulling air up towards the ceiling. We want to reverse the direction so it blows air down into the room. The usual reverse switch is nowhere to be found on the fan. I had an...
I am trying to install a switch that controls both the ceiling fan with 3 speeds and a dimmer switch all in one unit for a hunter ceiling fan. At the wall switch there is a black wire which is always hot, a red and a ground. At the ceiling, where I removed a light fixture, there is a black, red,...
The switch chain broke off and I replaced the brokenswitch with a different switch that I saved from an old fan that was thrown away. The broken (old) switch had four wires (L - black... 1 - orange... 2 - purple... 3 - yellow). The new/ replacement has only 3 wires. I foolishly failed to mark the...
I just installed a new Harbor Breeze ceiling fan and dual fan/light dimmer, also from Harbor Breeze. Unfortunately, now I'm scratching my head... Do I have a bad dimmer switch? Here's the problem: 1. The light will turn on only when the fan speed on the wall switch is set to high. 2. When...
View more questions Search
|
