Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
About 859M room thermostat.
[ 2 Answers ]
My friend recently purchased some 859M room thermastat and wall heaters... His question to me was:"even though the thermastat dial is turned all the way to the left(in the off position), why do the wall heaters still click on? Is there a room comfort setting that makes them always stay at least...
Fitting New Room Thermostat
[ 1 Answers ]
Hi there I have just bought a Horstman DRT2 room thermostat to replace my old manual one. The trouble is when I took the old one off, there are three wires Red, yellow and black which go into three separate (numbered) terminal connectors. The new thermostat has three terminals NO, COM and NC and...
Clicking room thermostat?
[ 2 Answers ]
Our room thermostat has started clicking (constantly) whenever the dial is turned above a certain level. The heating does work but the noise is annoying not to mention worrying - any ideas?
Furnace keeps room at 70 F, without thermostat
[ 8 Answers ]
I noticed this morning that the temperature on my 2nd floor (1 of 3 zones in my house) was at 70 degrees F. I had it set with my thermostat at 65. I turned it down to 60, and it still stayed at 70. I disconnected the thermostat, completely exposing the two wires and separating them. The other...
Wiring Help room thermostat
[ 1 Answers ]
Hi all am new here so pleasebare with me Am trying to fit a new room thermostat I have a smashed up honey well room thermostat (I have no idea off age its biege looking) I have just bought a cheep £10 wicks one but am unsure of the wires There's a red blue and yellow but I have no idea... View more questions Search
|