Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
"Clicking" noise from thermostat
[ 12 Answers ]
Several months ago we heard a "clicking" or snapping (like a whip) noise emanating from the thermostat in our hallway when we would put the A/C or heat on. It was an old style thermostat (dial) so we called a repairman and he said we needed to replace it with a new one. We have since had a new...
About 859M room thermostat.
[ 2 Answers ]
My friend recently purchased some 859M room thermastat and wall heaters... His question to me was:"even though the thermastat dial is turned all the way to the left(in the off position), why do the wall heaters still click on? Is there a room comfort setting that makes them always stay at least...
John Deere L110 Clicking sound on start - new solenoid, still clicking!
[ 1 Answers ]
Hi all, I cut my lawn, engine was running for about 2 hours. Stopped at neighbors house, cold beer, go to restart, just a clicking sound. Thought battery was dead, did a quick check, good voltage, hooked it up to a charger, good amps. Still clicking. I figure it's the solenoid, picked one up...
Furnace keeps room at 70 F, without thermostat
[ 8 Answers ]
I noticed this morning that the temperature on my 2nd floor (1 of 3 zones in my house) was at 70 degrees F. I had it set with my thermostat at 65. I turned it down to 60, and it still stayed at 70. I disconnected the thermostat, completely exposing the two wires and separating them. The other...
Wiring Help room thermostat
[ 1 Answers ]
Hi all am new here so pleasebare with me Am trying to fit a new room thermostat I have a smashed up honey well room thermostat (I have no idea off age its biege looking) I have just bought a cheep £10 wicks one but am unsure of the wires There's a red blue and yellow but I have no idea... View more questions Search
|