Ask Experts Questions for FREE Help !
Ask
    NickPow's Avatar
    NickPow Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2007, 08:03 AM
    Reinstalling Kenmore washing machine transmission?
    I have a Kenmore washing machine (11020092993) that wasn't spinning. I took it apart and found that the coupler was broken. Before I found the problem I had already taken the 3 bolts out that hold the transmission to the bottom. The transmission dropped about an inch but wouldn't come off the shaft. Now that I'm putting everything back together the transmission will only slide back up the shaft about halfway. I can't get it close enough to start the 3 bolts again.
    Is there something that's spring loaded that's now in the way when I try to slide it back on? I tapped on it with a hammer but it went nowhere, just sounded like metal to metal.

    Thanks in advance
    NickPow's Avatar
    NickPow Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Nov 14, 2007, 01:55 PM
    Never mind, I got it reinstalled. After flipping the washer over to get a better look, I put it back upright and the transmission slide right on like nothing ever happened.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore advantage washing machine [ 5 Answers ]

Washing machine is 15 years old. Problem is: water doesn't fill up tank. Keeps Running outside in the yard. Wife jiggles the knob. Then its okay. Doesn't do it all the time. What is there some kind a trap somewhere in the bottom of the machine that stays open allowing the water to drain out...

Kenmore washing machine [ 1 Answers ]

I have a kenmore three speed washing machine but cannot figure out how to get the top off Can anyone help me with this problem Thank you grumpypapa:( :confused:

Kenmore Washing Machine [ 2 Answers ]

My Kenmore model # 110. 91551210 wahing machine, will not agitate or spin, in none of the cycles, it will fill with water and drain, I also can hear the moter running but it will not agitate or spin, what is the problem?:confused:

Kenmore washing machine [ 1 Answers ]

My washing machine will not spin out the wash cycle or the rinse cycle. When I hold the lid latch down and turn the tub with my hand and it will start spinning fine. I can see it try to start spinng but it cant

View more questions Search