Ask Experts Questions for FREE Help !
Ask
    Dgail's Avatar
    Dgail Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 22, 2007, 12:34 PM
    Dryer not heating
    I have a roper dryer wasn't heating replaces heating element a year ago, seemed to fix it. Now a year later doing same thing. Could it be heating element again? Should they go out this much?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #2

    Oct 22, 2007, 01:27 PM
    Check it for continuity to see if it's gone bad. No, they should not go bad that quick. Also check the thermostats for continuity and clean the exhaust and remove the blower housing and clean that area very well

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dryer not heating up [ 1 Answers ]

I have a dryer about 8 years old. I thought the heating element was bad and I replaced it. I found out since that the element was fine. So were the 3 thermostats. There is no clog with any lint and every thing seems to work on the thing just no heat. The breaker also is OK. Any suggestions.

Dryer not Heating [ 2 Answers ]

I have a Kenmore dryer and it has not been heating up. I replaced the heating element and its still not getting hot. What else could it be?

Dryer Not Heating [ 31 Answers ]

I have a 14 year old Kenmore electric dryer that recently stopped heating. Everything else seems to be working fine. The drum works and there is plenty of air flow. I checking the different thermostats and heater element with a ohm meter and they all seemed to have activity except for the...

Dryer not heating [ 6 Answers ]

I have a Kemmore dryer that has stopped heating. The dryer tumbles and all apears to be good except no heat. I have checked the following: Thermal cutout - 0 ohms - Good Exhaust Thermostat - 0 ohms - good Heater thermostat - 0 ohms - good Heating element - 0 ohms - good Wiring - all good...


View more questions Search