Ask Experts Questions for FREE Help !
Ask
    katielynn0103's Avatar
    katielynn0103 Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 1, 2007, 04:16 PM
    Dryer not Heating
    I have a Kenmore dryer and it has not been heating up. I replaced the heating element and its still not getting hot. What else could it be?
    Lowtax4eva's Avatar
    Lowtax4eva Posts: 2,467, Reputation: 190
    Ultra Member
     
    #2

    Mar 1, 2007, 05:17 PM
    Loose wires or a blown fuse on the heating circuit... I assume it spins but no heat, you may want to have it looked at professionally as a wiring problem could be hard to find without the right tools and knowhow
    rbentz's Avatar
    rbentz Posts: 2, Reputation: 1
    New Member
     
    #3

    Sep 16, 2007, 04:15 PM
    Quote Originally Posted by katielynn0103
    I have a Kenmore dryer and it has not been heating up. I replaced the heating element and its still not getting hot. What else could it be?
    Thermostats, breaker,

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dryer Not Heating [ 31 Answers ]

I have a 14 year old Kenmore electric dryer that recently stopped heating. Everything else seems to be working fine. The drum works and there is plenty of air flow. I checking the different thermostats and heater element with a ohm meter and they all seemed to have activity except for the...

Dryer Heating Coil [ 1 Answers ]

My electric dryer is not generating any heat. I don't have a volt meter to test the current at the coil. A few of the coils look a little burnt, but the coil is not broken. All other elements of the dryer are working (ie. It is turning, the light is on inside) The vent is not clogged. Any...

Gas Dryer Not heating [ 1 Answers ]

We have an old whirlpool gas dryer that quit heating - the tumbler still works. The fuse is good, we replaced the Igniter and have continuity everytwhere. Only one of the cables coming from the coils leading to the igniter shows a low voltage - 26 (the the incoming cable reads 126) - Any ideas on...

Dryer not heating [ 6 Answers ]

I have a Kemmore dryer that has stopped heating. The dryer tumbles and all apears to be good except no heat. I have checked the following: Thermal cutout - 0 ohms - Good Exhaust Thermostat - 0 ohms - good Heater thermostat - 0 ohms - good Heating element - 0 ohms - good Wiring - all good...

Dryer not drying, heating [ 3 Answers ]

Help! I would like to fix this myself! My electric dryer is heating, but not drying my clothes. My lint trap is always clean every time I check it- which is weird because usually it needs to be cleaned between loads! When I open my dryer door (my dryer keeps going even when I open the door-...


View more questions Search