Ask Experts Questions for FREE Help !
Ask
    Knucklez's Avatar
    Knucklez Posts: 129, Reputation: 2
    Junior Member
    		  
    #1

    Oct 16, 2007, 05:38 PM
    Paint Roller left FUZZ on the wall and now it dried
    So I have a very expensive high quality roller and it left a LOT of fuzz on the wall.. unfortunately I didn't see it until after the paint dried.

    What can I do? I was thinking of just going over it with a very thick primer and then repainting.. will this work?


    I learned after the fact how to properly prep my roller with masking tape fuzz removal...

    Thanks,
    Knucklez
    glavine's Avatar
    glavine Posts: 895, Reputation: 87
    Senior Member
    		  
    #2

    Oct 16, 2007, 07:42 PM
    Yes you must use proper fuzz removal methods. That just sounds important. You might try and lighty sand those areas with 220grit sand paper, maybe use a pole sander, not a power sander. Good luck
    Knucklez's Avatar
    Knucklez Posts: 129, Reputation: 2
    Junior Member
    		  
    #3

    Oct 20, 2007, 12:33 PM
    Thanks for the advice. I got some 220 and tried it a bit by hand to see if it would work. No problem, works great.

    Just is a pain in the ;)

    Well, some things you learn the hard way :o

    Knucklez
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Best method to remove paint/plaster from block wall in basement [ 1 Answers ]

Hello all, I have a dilemma that I am hoping you can help with. I have basement walls that have what seems to be a plaster skimcoating and texture paint over the blocks. I believe this was done for purely aesthetic reasons - to fill in the "ugly" grout lines. I have tested and there's nothing...

Tile grout left on wall [ 2 Answers ]

Is there a way to remove tile grout after removing tiles. Some of the wall paper has come off in doing this. Can I just take all the paper off the wall and replaster it using wallboard plaster. Want to paint the wall

Paint from the same can but look different on the wall [ 2 Answers ]

Hi, Can paint from the same can look different on the wall. I juste painted my office with a semi-gloss paint (I think.. it looks sheen). Few weeks later I have to touch up some part of the wall, so I used the paint that was left. But this time the paint looked flat not glossy like the rest of the...

Interior Wall&Ceiling Paint ? - suggestions needed for repairs! [ 5 Answers ]

We recently had to do some remodeling in my living room to accommodate an electrical switch, overhead light, and 2 wall sconses. This included a contractor making several holes in my ceiling and walls and repairing the holes with drywall. The drywall looks great, however when he came back to...

Best kind of wall paint? [ 3 Answers ]

Howdy, I am looking for opinions on the best kind of wall paint to buy. We are re-painting old walls and painting new walls. I am going to prime everything with a vapor barrier primer from Benjamin Moore (The only latex vapor barrier primer I could find), so that I can get a uniform base...

View more questions Search