Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Interior Home Improvement (https://www.askmehelpdesk.com/forumdisplay.php?f=171)
-   -   Paint Roller left FUZZ on the wall and now it dried (https://www.askmehelpdesk.com/showthread.php?t=141515)

  • Oct 16, 2007, 05:38 PM
    Knucklez
    Paint Roller left FUZZ on the wall and now it dried
    So I have a very expensive high quality roller and it left a LOT of fuzz on the wall.. unfortunately I didn't see it until after the paint dried.

    What can I do? I was thinking of just going over it with a very thick primer and then repainting.. will this work?


    I learned after the fact how to properly prep my roller with masking tape fuzz removal...

    Thanks,
    Knucklez
  • Oct 16, 2007, 07:42 PM
    glavine
    Yes you must use proper fuzz removal methods. That just sounds important. You might try and lighty sand those areas with 220grit sand paper, maybe use a pole sander, not a power sander. Good luck
  • Oct 20, 2007, 12:33 PM
    Knucklez
    Thanks for the advice. I got some 220 and tried it a bit by hand to see if it would work. No problem, works great.

    Just is a pain in the ;)

    Well, some things you learn the hard way :o

    Knucklez

  • All times are GMT -7. The time now is 03:11 AM.