Ask Experts Questions for FREE Help !
Ask
    sodany's Avatar
    sodany Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 17, 2006, 02:05 PM
    Paint from the same can but look different on the wall
    Hi,
    Can paint from the same can look different on the wall. I juste painted my office with a semi-gloss paint (I think.. it looks sheen). Few weeks later I have to touch up some part of the wall, so I used the paint that was left. But this time the paint looked flat not glossy like the rest of the room. Do you know what might cause this ? I would appreciate any suggestion.

    Thank you
    RickJ's Avatar
    RickJ Posts: 7,762, Reputation: 864
    Uber Member
     
    #2

    Oct 17, 2006, 02:56 PM
    If you mixed the paint well - both the first time you painted and the touch-up - and primed well before the first coat, then then the only difference you should notice should be only for a day or so until the touch up spots dry.

    Not mixing well (either the first or 2nd time) or not priming the initial job well are about the only two causes of a noticeable difference within a few weeks that I can imagine.

    Sorry to say, but if the touch-up job is fully dry and still does not match, there's no miracle fix: You either live with it or re-paint the wall or walls where it is noticeable.
    caesars charm's Avatar
    caesars charm Posts: 80, Reputation: 7
    Junior Member
     
    #3

    Oct 22, 2006, 07:46 PM
    Hi Sodany! I think your problem was that you didn't stir your paint well enough before you put it on. A lot of the color goes to the bottom and gets thick so you have to make sure it's mixed well before using again. You should have just tried a little first and there still might be a little difference but it shouldn't be much. If you have some left over try again. GOOD LUCK!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Interior Wall&Ceiling Paint ? - suggestions needed for repairs! [ 5 Answers ]

We recently had to do some remodeling in my living room to accommodate an electrical switch, overhead light, and 2 wall sconses. This included a contractor making several holes in my ceiling and walls and repairing the holes with drywall. The drywall looks great, however when he came back to...

Flat Paint [ 1 Answers ]

I have some flat latex paint and would like to use it in the bathroom. Is there anything I can add to the paint ot make it #1 semi glossy and #2 Mildew resistant?

Paint color => new -v- old [ 5 Answers ]

We repainted a wall in our home. We used some paint remaining from the past (painted 4 years ago). Our intent was to keep a gallon for touch ups. However, the paint is lighter, in color, than the surrounding walls. Same paint, same mix lot. Painted 24 hours ago. Will it darken?

Best kind of wall paint? [ 3 Answers ]

Howdy, I am looking for opinions on the best kind of wall paint to buy. We are re-painting old walls and painting new walls. I am going to prime everything with a vapor barrier primer from Benjamin Moore (The only latex vapor barrier primer I could find), so that I can get a uniform base...

Microsoft Paint [ 2 Answers ]

I can't open my files with paint, Here is the error message AppName: mspaint.exe AppVer: 5.1.2600.0 ModName: mfc42u.dll ModVer: 6.0.8665.0 Offset: 00017103 What should I do?


View more questions Search