Ask Experts Questions for FREE Help !
Ask
    jackman's Avatar
    jackman Posts: 41, Reputation: 1
    Junior Member
    		  
    #1

    Aug 16, 2007, 11:08 AM
    b&s 18hp model 422707
    Please tell me what wires goes to the solenoid?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Aug 17, 2007, 05:03 PM
    Did you disconnect the old one, or are you rewiring, what is the cause of the problem?
    jackman's Avatar
    jackman Posts: 41, Reputation: 1
    Junior Member
    		  
    #3

    Aug 17, 2007, 05:28 PM
    I got it running thank you .
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #4

    Aug 18, 2007, 10:26 AM
    Glad to know you are back running.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

B&S 14HP Model 287707 slow crank starting [ 4 Answers ]

I have a 1992 MTD 1442 riding mower with a B&S 14HP OHV engine MOdel 287707 Type 0153 01 Code 9210214A. It hasn't been starting except with the use of a charger/starter. Engine wouldn't crank but when charger/starter put on it, could get engine started. Now even the charger/starter won't start...

B&S 18hp model 422707 [ 4 Answers ]

I need to know if this B&S can be out of time.The flywheel is keyed so I don't know how it could,but I don't know that much about it. Thanks Jack

B&S 18hp model 422707 [ 1 Answers ]

Where does the 2 wires coming from the stator go?

Briggs & Stratton 3.5hp Model 98902 [ 2 Answers ]

I have a Bolens Edger with a 3.5 Vertical Shaft Briggs which I purchased used with this problem: After priming the carb, the motor will start (it may take a couple of tries to keep it running) Once it keeps going, the engine seems to oscillate (revs up and dies down, revs up and dies down...

B&S 18HP INTEK Valves/Compression Release [ 1 Answers ]

Am having the same trouble as a lot of others with my 18 hp B&S Intek rider. The motor turns over 1 revolution and stops.Installed new battery and have reset the valve clearance to (.004 intake, 006 exhaust)I remember something about a gummed-up compression release causing this problem ....

View more questions Search