Ask Experts Questions for FREE Help !
Ask
    chicoa's Avatar
    chicoa Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 5, 2007, 09:20 PM
    Kenmore Electric dryer
    My dryer is a kenmore HE4 about 3 years old. Everything looks fine, except it does not heat up. Checked the exhaust vent and is fine, cheked the heating elements and it looks fine, once I put everything back together the dryer started heating up for awhile, then it went back to cold air. Is there something I missed? Any help is well appreciate it.

    Chicoa
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Aug 6, 2007, 02:26 PM
    Do a load with the vent hose disconnected form the back of the unit and post back with results. Have you tested any of the thermostats? Are all the connections to the thermostats and element snug?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore electric dryer series 70 [ 1 Answers ]

I cannot find the fuses it drescribes to look for on the dryer in case of no heat! Can someone help me?

Kenmore Elite Electric Dryer [ 1 Answers ]

I have a Kenmore Elite Electric dryer, model 110.64992300 that will not heat. I suspect the heater relay is bad, but I can't open up the top console to get to the electronics. Do you know how to open it or have directions showing how? I don't want to break anything.

Kenmore Electric Dryer Thermostat [ 1 Answers ]

I am replacing the thermostat on a Kenmore electric dryer. I need to know which terminal the red wire goes on. There are 3 terminals numbered 1, 2 and 3.

Kenmore electric dryer not spinning [ 1 Answers ]

The motor on my dryer turns on but it does not spin. Do you know what might be wrong with it?

View more questions Search