Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hunter thermostat 44110
[ 2 Answers ]
I have hot water baseboard heat, and installed the hunter digital thermostat 44110, and followed the directions as directed, I had had wires W, Y and RH, I marked and installed Each of the wires, and put them where they were marked on the thermostat. I felt well and all of the lights ( temp,...
Hunter 44110
[ 5 Answers ]
How should the wires match up to the hunter: I have yellow, red, white, green and then a red jumper wire if I use the jumper wire and I connect all the others to the letters of the color codes what would I do with the other red wire. My AC is not cooling at all... I changed filter, batteries......
Hunter 44110 Programmable Thermostat Wiring HELP!
[ 3 Answers ]
My current thermostat has the following six wires, hooked as follows: Orange to O Green to G Yellow to Y1 Red to R Black to C White to W1 I am attempting to install the Hunter Programmable thermostat, which only gives me 5 placements for wires:
Wiring a programmable thermostat
[ 2 Answers ]
I've purchased a Honeywell programmable thermostat for electric baseboard heat - model RLV430A. There are 2 black wires on the back of the new thermostat. The wiring instructions say "The thermostat wires are not polarized; either wire can be connected to the load or to the power supply". There...
Thermostat Replacement Honeywell 890121 - Hunter 44110
[ 2 Answers ]
Hi there! Need help to replace an old Honeywell model 890121 with a Hunter 44110 My existing (Honeywell 890121) wiring: Brown - C Green - G Yellow - Y --jumpered to--W Red - R White - O Hunter 44110: View more questions Search
|