Ask Experts Questions for FREE Help !
Ask
    Michelin's Avatar
    Michelin Posts: 5, Reputation: 1
    New Member
    		  
    #1

    May 26, 2007, 07:49 PM
    Hunter 44110
    How should the wires match up to the hunter:

    I have yellow, red, white, green and then a red jumper wire if I use the jumper wire and I connect all the others to the letters of the color codes what would I do with the other red wire. My AC is not cooling at all... I changed filter, batteries... etc. I have a Hunter 44110... please help

    G=?
    RC=? Jumper I guess goes here
    RH=? Jumper I guess here
    Y=?
    W=?

    and a red wire coming from the wall...
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    May 26, 2007, 08:06 PM
    Quote Originally Posted by Michelin
    How should the wires match up to the hunter:

    I have yellow, red, white, green and then a red jumper wire if i use the jumper wire and i connect all the others to the letters of the color codes what would I do with the other red wire., My AC is not cooling at all... I changed filter, batteries...etc. I have a Hunter 44110...please help

    G=?
    RC=? Jumper I guess goes here
    RH=? Jumper I guess here
    Y=?
    W=?

    and a red wire coming from the wall...
    The Green wire goes to the G terminal on the thermostat
    The yellow Wire goes to the Y terminal on the thermostat
    The white wire goes to the W terminal on the thermostat.

    That leaves the Red wire and it goes on the Rh terminal on the thermostat, also the jumper goes to Rc.
    Michelin's Avatar
    Michelin Posts: 5, Reputation: 1
    New Member
    		  
    #3

    May 26, 2007, 08:24 PM
    Nothing is happening I have the red wire in RH and also the jumper in RH and RC... so I have no idea what to do, does AC units need freon or something because it is running but not cooling. Thank you so much though.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #4

    May 26, 2007, 08:38 PM
    There are several reasons that the AC would run and not cool. First do you know that the compressor is running or is it just the outside fan running?
    Yes it could need freon. Is the air that is coming our the top of the condensing unit hot or warm or just like the outside air? You should feel some pretty warm air blowing out the condenser and the large copper pipe connected to the condensing unit should be at least cool if the compressor is running.

    Tell me more if this does not help. If it helps please rate the answer
    Michelin's Avatar
    Michelin Posts: 5, Reputation: 1
    New Member
    		  
    #5

    May 27, 2007, 02:12 PM
    There is air coming out it is like room temperature... I am trying to get someone out to take a look...
    Michelin's Avatar
    Michelin Posts: 5, Reputation: 1
    New Member
    		  
    #6

    May 28, 2007, 12:23 AM
    Now I just realized that the compressor is not coming on I have a Comfortmaker heating and cooling system so I have no idea what to and I have placed several calls trying to get someone to come out but it being a holiday weekend...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter thermostat 44110 [ 2 Answers ]

I have hot water baseboard heat, and installed the hunter digital thermostat 44110, and followed the directions as directed, I had had wires W, Y and RH, I marked and installed Each of the wires, and put them where they were marked on the thermostat. I felt well and all of the lights ( temp,...

Hunter 44110 Programmable Thermostat Wiring HELP! [ 3 Answers ]

My current thermostat has the following six wires, hooked as follows: Orange to O Green to G Yellow to Y1 Red to R Black to C White to W1 I am attempting to install the Hunter Programmable thermostat, which only gives me 5 placements for wires:

Thermostat Replacement Honeywell 890121 - Hunter 44110 [ 2 Answers ]

Hi there! Need help to replace an old Honeywell model 890121 with a Hunter 44110 My existing (Honeywell 890121) wiring: Brown - C Green - G Yellow - Y --jumpered to--W Red - R White - O Hunter 44110:

Need Help with Hunter Thermostat Please [ 4 Answers ]

I have a Payne PF1MNC hvac, and just replaced my White Rodgers thermostat (It wasn't blowing hot air or kicking in in Auto mode) with a Hunter 44155C. There were 4 wires attached: G to G R to Rh (with jumper) Y to Y1 W to W And an unattached B I attached them the same to the Hunter:

Hunter fans [ 1 Answers ]

I want to install a Hunter wall mount remote control for my hunter fan. Can anyone help?

View more questions Search