Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Using a Double Pole Breaker to feed two circuits
[ 11 Answers ]
I have 40' run from the main panel with BX and want to use 14/3 instead of two runs of 14/2. Is there a problem using a double pole breaker (15amp) to feed (with 14/3) a split receptacle and then a lighting circuit on one half and 4 receptacles on the other? Is the only drawback is when one...
Can I switch a 15 amp breaker to a 20 amp breaker?
[ 1 Answers ]
:confused: can I switch a 15 amp breaker to a 20 amp breaker? I just bought a home tanning bed and the plug has a horizontal plug which won't fit in a regular outlet. I bought a 20 amp outlet and installed it. The tanning bed tripped the circuit breaker. I got a 20 amp circuit breaker and replaced...
Tandem Breaker Allowed?
[ 9 Answers ]
Is it okay to use a tandem breaker in this service panel? It is supplying a 100-amp apartment. 1-20 amp Bath 2-20 amp small appliance circuit 1 3-20 amp small appliance circuit 2 4-15 amp Lights/Receps 5-20 amp lights/receps Circuit 5 will be upgraded to an AFCI breaker if that matters.
Outlets for GFI circuits - bath & kitchen
[ 3 Answers ]
Hi - 2 questions: 1. I'm adding whirlpool bathtub as part of a remodel job. I've got 2 20amp dedicated lines, 1 for the pump, 1 for the heater. Each of these has to be on a GFCI breaker in the main panel, do I just use a regular receptacle under the tub enclosure, or is there a special...
Wiring circuits with smokes & lights
[ 1 Answers ]
I am building my basement right now and have been reading about wiring and circuits. I thought I had everything figured out for my basement until I started looking into my lighting circuit today. I had a circuit that I thought I could easily add to, to handle my needs. I will be adding three... View more questions Search
|