Ask Experts Questions for FREE Help !
Ask
    majormcrae's Avatar
    majormcrae Posts: 2, Reputation: 1
    New Member
     
    #1

    May 9, 2007, 12:11 PM
    Ceiling Fan Installation
    I have a very steep family room ceiling angle. I proceeded to install the fan and found out that the drop down bar does is not level due to the ceiling angle. Is there a special installation kit (hangar unit) for steeply angled ceilings?

    Barry
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    May 9, 2007, 12:31 PM
    Yes there is, several brands offer them, what make is the fan?
    majormcrae's Avatar
    majormcrae Posts: 2, Reputation: 1
    New Member
     
    #3

    May 9, 2007, 01:36 PM
    Quote Originally Posted by ceilingfanrepair
    Yes there is, several brands offer them, what make is the fan?

    Hampton Bay 60". I went to Home Depot but they do not have one that I can use. It is just a generic replacement for standard ceiling.
    frizz1862's Avatar
    frizz1862 Posts: 36, Reputation: 1
    Junior Member
     
    #4

    May 9, 2007, 08:26 PM
    You should be able to look in the instruction manual and it should tell you how to install your fan on an angle.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #5

    May 15, 2007, 06:09 PM
    You will have to try somewhere other than Home Depot. Most lighting showrooms will have them but they may be pricey. Menards and WalMart used to have them, I don't know if they still do. You can buy them online, for example:

    Sloped Ceiling Adaptor

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling fan installation [ 3 Answers ]

? I have a used ceiling fan with lights and have no idea on how to wire it. I have 3 wires comeing out of the ceiling. Black, white and bare copper. The fan/light assembly has 3 wires black, blue and white. The mounting bracket has 1 green wire and the part the post part has a green wire on it...

Ceiling fan installation [ 2 Answers ]

We have a Hampton Bay Finley ceiling fan. We love the fan, but are not sure if it hangs too low from the ceiling. Do you know of a way to mount it flush with the ceiling instead of with the rod? Is there a different mounting kit we could purchase?

Ceiling Fan Installation [ 1 Answers ]

I am trying to replace a plain ceiling fan with a newer ceiling fan with a light. It is necessary for me to use a remote because the fan is about 15 feet in the air and am unable to use the controls through the pull strings. So, I bought a hunter fan and a Harbor Breeze in wall remote. I...

Ceiling Fan Installation [ 2 Answers ]

We installed a ceiling fan, however, we encountered a little trouble. There are 3 wires coming from the ceiling - black, white & red. We attached the black to black, white to white & capped the red. The ceiling fan works, but the LIGHT on the ceiling fan doesn't. I assume the red wire is for...

Ceiling fan installation [ 1 Answers ]

Hi, I am in the middle of installing a ceiling fan where there had been a light fixture. I have already upgraded the brace to support the fan/light and am now down to the wiring. Here is the issue that I hope someone can help with. The house is old although there was an addition put on 20 years...


View more questions Search