Ask Experts Questions for FREE Help !
Ask
    purplegal46's Avatar
    purplegal46 Posts: 2, Reputation: 1
    New Member
     
    #1

    May 3, 2007, 04:10 PM
    Harbor Breeze Fan Blades
    Our Harbour Breeze Fan has 2 pulls, one for the light and one for the fan. When I pull the one for the fan the blades will turn just barely and will not go any faster. How can we correct this?:confused:
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    May 3, 2007, 05:13 PM
    Sounds like it might have a bad capacitor. How old is the fan?

    General ceiling fan troubleshooting and help FAQ- Ceiling Fans N More
    purplegal46's Avatar
    purplegal46 Posts: 2, Reputation: 1
    New Member
     
    #3

    May 3, 2007, 07:09 PM
    The fan is 8 years old
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #4

    May 3, 2007, 08:16 PM
    Check the troubleshooting instructions I mentioned to confirm it is the capacitor.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling Fan working, Fan light not, Harbor Breeze [ 7 Answers ]

I recently tried to help a friend install a Harbor Breeze ceiling fan w/ a light kit (this model 52" White Ceiling Fan ENERGY STARŪ) The fan has 4 wires: green, white, black, and blue. The house has 3 wires: green, white, and black. Per the instructions we hooked up the green to green,...

Harbor breeze fan [ 4 Answers ]

I have a harbor breeze ceiling with a remote that was never wired in.can I reverse the fan direction manually.

Harbor Breeze fan [ 3 Answers ]

Have a Harbor Breeze fan -Model AER52BP5LKRC - It has a 3 speed fan, lights w/ dimmer and a remote. The fan works fine with the remote. But the light only goes on and off - it won't dim. Is it wiring or the fan/lights?

Harbor breeze fan [ 1 Answers ]

We recently installed a harbor breeze fan. It worked fine initially, then did strange things. It stopped spinning one direction and reversed itself. It did this twice. Now the speed of the fan is not working at all - it barely turns. An electrician checked the installation and checked the...

Harbor Breeze fan [ 3 Answers ]

Just installed my fan and everything works perfectly. After 10 minutes, the HI speed does not work anymore when pushed on the remote (the fan is just stopped) and it looks like MED and LOW speeds are the same. Can anybody help me with this? Thanks


View more questions Search