Ask Experts Questions for FREE Help !
Ask
    mikerios's Avatar
    mikerios Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 21, 2016, 02:14 PM
    Flame coming out from boiler
    I have a propane fired boiler. The Microtemp Fuse Limit STC5300 G4AM0600 152C Thermal Cutoff Switch, which is a heat-sensitive fusible link, has failed. The cause was the flame from the burner area was spreading out into the controls area; (I know that that is the purpose of this part.)
    There was also an L340F limit switch, positioned in the air intake, that was tripped. I believe it is the manual reset kind, and in the process of troubleshooting, I suspect I reset it. (It had no continuity when I first tested it, but after I removed it, it had continuity.)

    The burners have a coating of soot/carbon, which is probably related to whatever caused the flame to spread out of its proper location.

    Carrier?
    Boiler Model # BW2AAN000105ABAA
    Series # PWB-4D
    Serial # 4704V08476

Check out some similar questions!

Adjusting gas boiler flame [ 7 Answers ]

I have a Vulcan floor standing gas boiler, some 30 years old. Recently I have had problem with the pilot light going out, maybe once a week. It seems worse when we have windy weather, but when I watch the main burner igniting/extinguishing (using the thermostat knob), the pilot light seems to...

Ok My heating unit is not coming on. The flame sensor has been cleaned by my husband. [ 1 Answers ]

The ignitor is still not glowing. Can you help?

Main24e gas boiler will not fire up flame failur light keeps coming on .some time it [ 0 Answers ]

I have main24e boiler.I noticed 3 weeks ago. That hot water from the boiler was not hot as it normaly I had for showering.so I called an engneer to check it out. He told me that heat exchanger was blocked up that need replacing.so I had him replace the heat exchanger.the hot water went back to...

Beckett AFG model Oil Boiler NO FLAME [ 3 Answers ]

I have no contract for yearly cleaning I have changed the filters and oil strainers, I am getting oil in the line, but NO Flame. Is it possible to cean the ignition nozzle? Can anyone recommend a fix to this problem... Snow is in the forcast. Please help.

Flame on Vailiant Boiler (propane) [ 1 Answers ]

The flame (propane) on our 10 yr old Valiant boiler I(Has 3 zones) is sometimes burning yellow not blue. There are two burners. Each burner has a long grated area inside through which the fuel is burned. The flame looks correct most of the time but occasionally The blue flame occurs in the tube...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.