 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Water collecting in inducer blower fan.
We have a Armstrong Air Ultra 5 Enhanced 95V furnace and water keeps collecting in this fan housing of thr lnducer blower. Which maker the inducer motor run hot and the furnace shuts down before the house warms up to temp.
|
||||
|
||||
|
Sounds like condensation from the vent is falling back down into the inducer. This is aggravated with cold weather and long piping runs. You may also have a sag in the horizontal vent and it allows water to run back. I believe the unit is shutting down because of pressure buildup in the vent and the pressure switch is not closing.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The inducer blower on my goodman furnace will turn on the stop like there's some type of blockage what could be the problem?
My inducer blower motor fan on my furnace is failing every month. It is plastic and a fasco a164 model. I have had the combustion tested and it is OK. Is there any other causes that would lead to this premature failure of the fan (the actual motor is fine)?
My hot water tank inducer blower is stuck on. What should I do?
Hello experts. I've got an outdoor Goodman furnace and a/c unit, model # PGB036100, that's giving me some problems. It's getting pretty cold. Would love some insight. Here's the problem. The furnace isn't turning on at all. The following happens every time. I turn my thermostat on to heat,...
I have a REEM RGRA 07EMAEB fyrnace. The blower motor comes on but doesn't suck enough to close the pressure switch. My exhaust and intakes are free of obstructions have proper termination, proper amount of elbows and my ptrap is working properly and draining. I changed the inducer motor and...
View more questions Search
|
