Ask Experts Questions for FREE Help !
Ask
    rlpridgen's Avatar
    rlpridgen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2016, 06:57 PM
    Where can I get an external condensation flow pipe/iron?
    I need an external male Name: air hole pipe joint.jpg Views: 265 Size: 146.4 KBcondensation flow pipe with an elbow on it to connect to the internal condensation flow pipe to water can be directed to a drain. Someone said a 3/4 inch pipe would work but it didn't. I think the 58STA/STX uses a different measuring unit, more like metric I think.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jan 24, 2016, 07:12 PM
    That is an internal pipe thread fitting. Can't tell the size but it is probably 3/4". Get a 3/4" and a 1/2" pipe nipple about 3 or 4 inches long. Screw the appropriate pipe nipple into the fitting to clean out the threads of the fitting. Remove the nipple and then screw in the proper size PVC male adapter. After installing the PVC adapter, glue up the PVC piping to where you want to drain.

    Never heard of a US air conditioner coil using metric fittings.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Jan 24, 2016, 09:22 PM
    1/2 or 3/4" male IP adapter to PVC pipe.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I remove a glued PVC pipe from a cast iron pipe drain in my bathroom? [ 2 Answers ]

I have a very old house and have a cast iron pipe as the largest part of my waste drain in the bathroom. I want to place my toilet in a different area of the bathroom. If I want to do this, I have to remove the pvc elbo that is connected into the cast iron pipe. Is there an easy way to remove...

Condensation in bathroom and lack of air flow. [ 2 Answers ]

I have very poor airflow in my master bathroom. The vent fan seems to do very little, as even mirrors in my bedroom are getting slightly fogged up. Hanging towels don't fully dry between showers, and I'm afraid mold might start to grow. On top of that, the window is constantly soaked in...

Replace 3" ABS pipe bonded into cast iron cleanout pipe [ 1 Answers ]

Need to connect new 3" ABS pipe to an old cast iron cleanout pipe just above cement floor. Need to create a new cleanout in 3" ABS that will be 12" above the old cast iron cleanout so that a main sewer line blockage between the main stack & the street sewer some 25 feet away can be removed. Had to...

How do you disconnect concrete sewer pipe form cast iron pipe [ 10 Answers ]

Well, I have dug out to the cast iron connection outside my stem wall and the concrete pipe seems to be cemented to the cast iron pipe. Any tricks to get this cast iron pipe cleaned up so I can connect the plastic pipe to it? Could I use a small chisel and chip away carefully so as not to break...

Put pipe thread on abs to cast iron pipe threads? [ 3 Answers ]

I have a 1-1/2" cast iron show drain. will attach to 1-1/2" abs male threaded coupling. Do I need to put pipe thread or plummers puty on the threads?

View more questions Search